High Pressure Hydrostatic Pipe Tester
A-TUBE STRAIGHTENING MACHINE ½” -4”
TECHNICAL DATA
Tube diameter : 1/2”-4”
Tube length : 4-8 m.
B-TUBE END DEBURRING AND FACING MACHINE ½” -4”
TECHNICAL DATA:
Tube diameter : ½”-4” n.b.
Tube length : 4-7 m.
Capacity:
Based on 100% utilization, a good machinability of the pipe material to be worked, exact straightened pipes with cold-sawed dısconnectıng points, cutting speed 150m/min, the capacıty on 7 m. long tubes will be as follows:
The speed tolerance is ± 10%.
Nom. size with piece/h
Medium wall thickness approx
½” 950
¾” 900
1” 700
1¼” 550
1½” 450
2” 425
2½” 400
3” 360
4” 280
C-SINGLE TUBE HYDRAULIC TESTING PRESS ½”– 4”
TECHNICAL DATA:
Tube diameter : 1/2”-4” nom.bore
Tube length : 4-7m
Tube standart : DIN 2440 and DIN 2441
Length tolerance : 40 mm
Test pressure : max. 60 bar
Capacity,depending on
Hight above floor-level : approx. 1.000 mm
The speed tolerance is ± 10%.
pipe
|
piece/hour
|
|
|
|
|
1/2″ |
420
|
3/4″ |
410
|
1″ |
378
|
1 1/4″ |
348
|
1 1/2″ |
330
|
2″ |
318
|
2 1/2″ |
300
|
3″ |
276
|
4″ |
252
|
D-TUBE THREADING MACHINE ½” – 4”
TECHNICAL DATA:
Tube diameter ½ ” – 4” n.b.
Tube length 4 – 7,5 m.
Capacıty: Based on 100% utilization , a good mechanıbility of the pipe material to be worked and exact staightened end finishing pipes , cutting speed 40m/min. , the capacity on 7m. Long tubes wiil be as follows:
Nom. size piece/hour
approx
½ ” 750
¾” 700
1” 550
1 ¼” 450
1 ½” 380
2” 340
2 ½” 300
3” 220
4” 200